HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The serial number.Serial No.
The IP address mode set.
Based on Serial Number: Set the IP address from the serial number.Specified: Set the specified
IP address.
IP Address Mode
The IP address set.IP Address
The subnet mask set.Subnet Mask
The mounting location of the port.Port
Indicates the range of the CU number that the port belongs.CU Number
The emulation type.Emulation
The number of ports.Num. of Ports
The LDKC number and the CU number.LDKC:CU
The LDEV number.LDEV
The storage system ID.SSID
The number of storage system IDs.Num. of SSIDs
The status of TPF Function settingsTPF Enable
ON: Enabled OFF: Disabled
The allocated number of MPLsNumber of MPLs
A hyphen (-) appears if the TPF Enable is OFF.
[Install] Update Config
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Update Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx}
Detailed information
DescriptionItem
The new version number.New Ver.
The old version number.Old Ver.
[Install] Volume to Space
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Volume to Space,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV}=[{1-1,0x00:0x00:0x01},{1-1-(1),
0x00:0x00:0x02}],Num. of LDEVs=2
Install descriptions 103