HP XP P9000 Audit Log User and Reference Guide

[Maintenance] Drive Interrupt
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Drive Interrupt,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PDEV=HDD000-00
Detailed information
DescriptionItem
The mounting location of the PDEV (physical device).PDEV
[Maintenance] Format
The logged information indicates that the Format operation was only requested but not completed.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Format,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
Detailed information
DescriptionItem
The parity group numberPG
E1-1: In case of an external volume
V1-1:In case of a virtual volume
X1-1: In case of a Thin Provisioning volume
The number of parity groupsNum. of PGs
The LDKC number, the CU number, and the LDEV numberLDEV
The number of LDEVsNum. of LDEVs
[Maintenance] Format Stop
This log information is output when the format process is suspended.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Format Stop,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
Detailed information
DescriptionItem
The parity group number.
E1-1: In case of an external volume. V1-1: In case of a virtual volume. X1-1: In case of a Thin
Provisioning volume.
PG
The number of parity groups.Num. of PGs
Maintenance descriptions 113