HP XP P9000 Audit Log User and Reference Guide

Table Of Contents
{0x00:0x00:0x00,XXXXXX-XX,XXXXXX-XX}],
Num. of LDEVs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where the
setting information of Cache Residency cache is canceled.
LDKC:CU:LDEV
The starting cylinder number (CC) and the starting head number (HH) of the cancelled data.Start CC-HH
The ending cylinder number (CC) and the ending head number (HH). This number is output
when the ending cylinder and ending head are specified for the cancelled data.
End CC-HH
The number of logical volumes (for a mainframe system) where the setting information of Cache
Residency cache is cancelled.
Num. of LDEVs
[Perf Mon] Delete Open Cache Residency
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Mon],Delete Open Cache Residency,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Start LBA,End LBA}
=[{0x00:0x00:0x00,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},
{0x00:0x00:0x00,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],
Num. of LDEVs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for an open system) where the setting
information of Cache Residency cache is canceled.
LDKC:CU:LDEV
The starting LBA number of the cancelled data.Start LBA
The ending LBA number of the cancelled data. This number is output when only the ending LBA
is specified for the cancelled data.
End LBA
The number of logical volumes (for an open system) where Cache Residency cache is canceled.Num. of LDEVs
[Perf Mon] Delete Unused WWNs
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Delete Unused WWNs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Perf Mon] Edit CU Monitor Mode
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit CU Monitor Mode,Enable,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+[LDKC:CU] = [0x00:0x00,0x00:0x01,0x00:0x02],Num. of CUs = 3
Performance Monitor descriptions 121