HP XP P9000 Audit Log User and Reference Guide

[PROV] Create Resource Grps
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Create Resource Grps,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Resource Group ID,Resource Group Name,Result}
=[{1,RSG1,Normal end},{2,RSG2,Normal end}],
Num. of Resource Groups=2
Detailed Information
DescriptionItem
The resource group ID of a created resource group. A hyphen (-) is output when the
creating operation failed.
Resource Group ID
The resource group name of the created resource group.Resource Group Name
The result of the operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of created resource groups.Num. of Resource Groups
[PROV] Create/Expand Pools
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Create/Expand Pools,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,Pool Type,Multi Tier Pool,Warning Threshold(%),
Depletion Threshold(%),Subscription Limit(%),Tier Management,
Cycle Time,Monitoring Period,Monitoring Mode,Pool Result}
=[{1,Thin Provisioning,Enable,20,70,100,Auto,24,00:00-23:59,
Continuous Mode,Normal end}],Num. of Pools=1
++{LDKC:CU:LDEV,External LDEV Tier Rank,LDEV Result}
=[{0x00:0x00:0x00,Middle/Internal,Normal end},
{0x00:0x00:0x01,Middle/Internal,Normal end},
{0x00:0x00:0x02,Middle/Internal,Normal end}],Num. of LDEVs=3
Detailed information
DescriptionItem
The pool ID of the created or expanded pool.Pool ID
The pool type.Pool Type
Snapshot: Snapshot, Thin Provisioning: Thin Provisioning, Fast Snap: Fast Snap
Whether the multi-tier mode of the created or expanded pool is enabled or disabled.Multi Tier Pool
Enable: Enabled, Disable: Disabled
If Pool Type is Snaphot or Fast Snap, a hyphen (-) is output.
The warning threshold of the usage rate of the created or expanded pool. The unit is indicated
as a percentage.
Warning Threshold(%)
The depletion threshold of the usage rate of the created or expanded pool. The unit is indicated
as a percentage.
Depletion
Threshold(%)
If Pool Type is Snapshot or Fast Snap, or if the depletion threshold is not specified, a hyphen
(-) is output.
Provisioning descriptions 133