HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
The reserve amount of the created or expanded pool.Subscription Limit(%)
The unit is indicated as a percentage.
If the reserve amount is not specified, it outputs “Unlimited.”
If the pool type is Snapshot or Fast Snap, a hyphen (-) is output.
The auto control mode of the created or expanded pool.Tier Management
Auto: Auto, Manual: Manual
If Multi Tier Pool is anything other than Enable, a hyphen (-) is output.
The cycle of performance monitoring for the created or expanded pool.Cycle Time
0.5: every thirty minutes, 1: every one hour, 2: every two hours, 4: every four hours, 8: every
eight hours, 24: every twenty-four hours
If Tier Management is anything other than Auto, a hyphen (-) is output.
The monitoring period of the pool.Monitoring Period
Format: “H1:M1-H2:M2” H1: The time when the monitoring starts (hour) M1: The time when
the monitoring starts (minute) H2: The time when the monitoring ends (hour) M2: The time when
the monitoring ends (minute).
If Cycle Time is anything other than 24, a hyphen (-) is output.
The monitoring modeMonitoring Mode
Continuous Mode: Continuous mode, Period Mode: Period mode
If Multi Tier Pool is anything other than Enable, a hyphen (-) is output.
The result of pool creation or expansion.Pool Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyyy: Error code
The number of the created or expanded pools.Num. of Pools
The LDKC number, the CU number and the LDEV number of the pool volume assigned to the
created or expanded pool.
LDKC:CU:LDEV
The external LDEV tier rank of the pool volume assigned to the created or expanded pool
High: An external volume (High)
Middle/Internal: An external volume (Middle) or an internal volume
Low: An external volume (Low)
External LDEV Tier
Rank
The result of the assigning the pool volume to the created or expanded pool.LDEV Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyyy: Error code
The number of the created or expanded pool volume.Num. of LDEVs
[PROV] Delete Host Group
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Delete Host Group,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID}=[{XX,0xXXX},{XX,0xXXX}],Num. of Host Groups=2
134 Audit log examples