HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device
authentication setting is changed.
LDKC:CU:LDEV
Indicates whether the command device authentication setting is enabled or disabled.UserAuth
Disable or Enable will appear.
The number of logical volumes where the command device authentication setting is changed.Num. of LDEVs
[PROV] Edit Cmd Dev(DevGrp)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}
=[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the device groups setting is
changed.
LDKC:CU:LDEV
Indicates whether the device groups setting is enabled or disabled.DevGrpDef
Disable or Enable will appear.
The number of logical volumes where the device groups setting is changed.Num. of LDEVs
[PROV] Edit Cmd Dev(Sec)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}=
[{0xXX:0xXX:0xXX,Disable},{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device security
setting is changed.
LDKC:CU:LDEV
Indicates whether the command device security setting is enabled or disabled. Disable or Enable
will appear.
CommandDevSec
The number of logical volumes that the command device security setting is changed.Num. of LDEVs
Provisioning descriptions 139