HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
The result of editing pool volumes per pool volumeLDEV Result
Normal end: Normal end
Error(xxxx-yyyyy): Abnormal end
Not Execute: Not executed
where xxxx: Part code, yyyyy: Error code
The number of edited pool volumesNum. of LDEVs
[PROV] Edit MP Blades
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit MP Blades,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{DKC,MP Blade ID,Auto Assignment,Result}
=[{0,0,Enable,Normal end}],Num. of MP Blades=1
Detailed information
DescriptionItem
The DKC number (0 to 1).DKC
The MP Blade number in the DKC module displayed in the window (0 to 7).MP Blade ID
Indicates whether the auto assignment setting is enabled or disabled.Auto Assignment
Enable or Disable will appear.
The result of the operationResult
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of specified MP Blades (1 to 8).Num. of MP Blades
[PROV] Edit Ports(Address)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Address),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num. of Ports=2
Detailed information
DescriptionItem
The name of the port that the address has been changed.Port
The address of Fibre Channel port after change using the number from 1 to 126. See the
following table for relation of number and Fibre Channel port address.
Fibre Addr.
The number of ports where address has been changed.Num. of Ports
Provisioning descriptions 145