HP XP P9000 Audit Log User and Reference Guide

Detailed Information
DescriptionItem
The tiering policy IDTiering Policy ID
The upper limit threshold value for the Tier1Tier1 Max(%)
The threshold value is displayed in the range 0 to 100. The unit is percent (%).
This is output when the upper limit threshold value for the Tier1 is set.
The lower limit threshold value for the Tier1Tier1 Min(%)
The threshold value is displayed in the range 0 to 100. The unit is percent (%).
This is output when the lower limit threshold value for the Tier1 is set.
The upper limit threshold value for the Tier3Tier3 Max(%)
The threshold value is displayed in the range 0 to 100. The unit is percent (%).
This is output when the upper limit threshold value for the Tier3 is set.
The lower limit threshold value for the Tier3Tier3 Min(%)
The threshold value is displayed in the range 0 to 100. The unit is percent (%).
This is output when the lower limit threshold value for the Tier3 is set.
The result of operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end,
Not Execute: Not Executed
where xxxx: Part code, yyyyy: Error code
The number of tiering policy that was setNum. of Policies
[PROV] Edit VR Attribute
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Edit VR Attribute,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Attribute,Result}
=[{0x00:0x00:0x00,Protect,Normal end},
{0x00:0x00:0x01,Protect,Normal end}],Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC number, the CU number, and the LDEV number of the volume in which the access
attribute is set
LDKC:CU:LDEV
Indicates the set access attributeAttribute
Read/Write: The attribute that enables reading and writing
Read Only: The attribute that enables reading only
Protect: The attribute that disables accessing
The result of operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
Provisioning descriptions 149