HP XP P9000 Audit Log User and Reference Guide

+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume where the device group definition is specified.LDKC:CU:LDEV
Indicates whether the device group definition is enabled or disabled.UserAuth
Disable or Enable will appear.
The number of logical volumes where the device group definition is set.Num. of LDEVs
[PROV] Set FCSP Host
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Host,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Kind,UserName,Change UserName}
=[{1E,0xXXX,Add,1111111111111111,-},
{3E,0xXXX,Change,2222222222222222,3333333333333333},
{5E,0xXXX,Delete,4444444444444444,-}],Num. of Info=3
Detailed information
DescriptionItem
The name of the port that includes the host group where user name has been set.Port
The number of the host group where user name has been set.HostGrpID
The setting status of the user name that is registered to the host group.Kind
Add: Add user name, Change: Change user name, Delete: Delete user name.
The user name added or deleted when Kind is Add or Delete.UserName
The user name before change when Kind is Change.
The user name after change when Kind is Change.Change UserName
Indicates a dash (-) when Kind is Add or Delete.
The number of added, changed or deleted user names.Num. of Info
[PROV] Set FCSP Port Info
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Port Info,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Auth_TOV,Reject Time,Reject Count}
=[{1E,45,3,3},{3E,60,1,10}],Num. of Ports=2
Detailed information
DescriptionItem
The name of the port where authentication parameter has been set.Port
The time to execute authentication after the failure of port authentication. The unit is second.Auth_TOV
162 Audit log examples