HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
The period of time to reject authentication when port authentication have failed. The unit is
minute.
Reject Time
The number of authentication failures allowed before port authentication is rejected.Reject Count
The number of ports where authentication parameter has been set.Num. of Ports
[PROV] Set FCSP Port Switch
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Port Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch,DH Group,Auth,UserName}
=[{1E,Enable,0,bi-directional,1111111111111111},
{3E,Disable,0,unidirectional,2222222222222222}],
Num. of Ports=2
Detailed information
DescriptionItem
The name of the port where authentication parameter has been set.Port
The setting status whether to execute authentication by port.Switch
Disable: Do not authenticate, Enable: Authenticate
Not used. (fixed to 0)DH Group
The setting status of authentication method.Auth
bi-directional: bi-directional authentication, unidirectional: unidirectional authentication
The user name of the port.UserName
The number of ports where authentication parameter has been set.Num. of Ports
[PROV] Set FCSP Target
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Target,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Switch,DH Group,UserName}
=[{1E,0xXXX,Enable,0,1111111111111111},
{3E,0xXXX,Disable,0,2222222222222222}],
Num. of Grps=2
Detailed information
DescriptionItem
The name of the port that includes the host group where authentication parameter has been
set.
Port
The number of the host group where authentication has been set.HostGrpID
The setting status whether to execute authentication by host group.Switch
Disable: Do not authenticate, Enable: Authenticate
Not used. (fixed to 0)DH Group
Provisioning descriptions 163