HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
The user name of the host group.UserName
The number of host groups where authentication parameter has been set.Num. of Grps
[PROV] Set Fibre Address
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Fibre Address,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fibre Addr.}=[{XX,0xXX(xx)},{XX,0xXX(xx)}],Num. of Ports=2
Detailed information
DescriptionItem
The name of the port that the fibre address has been set.Port
Fibre Addr. displays the address of Fibre Channel port after the setting.Fibre Addr.
The outside of the parentheses indicates AL-PA (arbitrated-loop physical address), and the inside
of parentheses indicates the loop ID.
The number of ports where address has been set.Num. of Ports
[PROV] Set Fibre Topology
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Fibre Topology,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}
=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed information
DescriptionItem
The name of the port where the topology of Fibre Channel is set.Port
Indicates whether the Fabric switch is enabled or disabled.Fabric
Enable: Enabled, Disable: Disabled
The connecting mode of the Fabric switch selected.Connection
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is set.Num. of Ports
[PROV] Set Host Mode
This log is output when LUN Manager operation is performed using Configuration File Loader.
164 Audit log examples