HP XP P9000 Audit Log User and Reference Guide

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Host Mode,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Mode,Option[0:31],Option[32:63],Option[64:95]}
=[{XX,0xXXX,0x00,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX},{XX,0xXXX,
0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],Num. of Host Groups=2
Detailed information
DescriptionItem
The name of the port to which the host group belongs.Port
The host group number.HostGrpID
The host mode set. See the HP XP P9000 Provisioning for Open Systems User Guide for the
description of the host mode number.
Mode
The specified host mode option. The host mode options are configured with 96 units of 0 to 95,
and are divided into 32 units to output. See Table 13 (page 142) to Table 15 (page 143) for the
relation of output values and host mode option.
Option[0:31]
Option[32:63]
Option[64:95]
See the HP XP P9000 Provisioning for Open Systems User Guide for the description of the host
mode number.
The number of host groups that the host mode setting is changed.Num. of Host Groups
[PROV] Set PageTieringLevel
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set PageTieringLevel,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Result}=[{0x00:0x00:0x00,Normal end}]
++{Start Page,Page Length,Page Tiering Level,Page Range Result}
=[{10,5, Level1,Normal end},{100,10, Level1,Normal end}],
Num. of Page Ranges=2
+Num. of VOLs=1
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume where the tiering policy is setLDKC:CU:LDEV
The result of setting the tiering policy to the volumeResult
Normal end: Normal end
Warning(xxxx-yyyyy): End with warning
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The beginning page number of page rangesStart Page
The length of page rangesPage Length
The level of the tiering policy that is set to the page rangesPage Tiering Level
If you unset the tiering policy, a hyphen (-) is output.
The result of setting the tiering policy in page rangesPage Range Result
Normal end: Normal end
Warning(xxxx-yyyyy): End with warning
Provisioning descriptions 165