HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The specified number of page rangesNum. of Page Ranges
The number of volumes where the tiering policy is setNum. of VOLs
[PROV] Set Security Switch
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set Security Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Detailed information
DescriptionItem
The name of the port where the LUN security setting is changed.Port
Indicates whether the LUN security setting is enabled or disabled.Switch
Disable or Enable will appear.
The number of ports where the LUN security setting is changed.Num. of Ports
[PROV] Set SSID
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Set SSID,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SSID,LDKC:CU:LDEV}
=[{0xXXXX,0xXX:0xXX:0xXX},{0xXXXX,0xXX:0xXX:0xXX}],
Num. of SSIDs=2
Detailed information
DescriptionItem
The SSID number.SSID
The LDKC, CU, and LDEV numbers.LDKC:CU:LDEV
The number of SSID.Num. of SSIDs
[PROV] Set UserAuth
This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set UserAuth,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,UserAuth}
=[{0xXX:0xXX:0xXX,Enable}],Num. of LDEVs=1
166 Audit log examples