HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary volume in the deleted pair.P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary volume in the deleted pair.S-VOL(LDKC:CU:LDEV)
The Snapshot ID of the deleted pair.MU
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of deleted pairs.Num. of Pairs
SNMP API descriptions
[SNMP API] Set SNMP Agent
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[SNMP API],Set SNMP Agent,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Install=Disable
+Manager=[(158.214.133.1),(158.214.133.2),(158.214.133.3),
(1:0:0:0:0:0:0:1),(snip)
-(158.214.133.31),(158.214.133.32) ,(AAAA:0:0:0:0:0:0:FFFF)],
Num. of Managers=xx
+Community
=1234567891123456789212345678931234567894123456789512345678961234
56789712345678981234567899123456789012345678911234567892123456789
312345678941234567895
++Trap=[(158.214.133.1),(158.214.133.2),(158.214.133.3),
(1:0:0:0:0:0:0:1),(snip)
-(158.214.133.31),(158.214.133.32) ,(AAAA:0:0:0:0:0:0:FFFF)],
Num. of Traps=xx
(snip)
+Num. of Communities=xx
+System Group(Name,Contact,Location)
={12345678911234567892123456789312345678941234567895123456789612
3456789712345678981234567899123456789012345678911234567892123456
78,
-123456789112345678921234567893123456789412345678951234567896123
4567897123456789812345678991234567890123456789112345678921234567
89312345678941234567895123456789612345,
-123456789112345678921234567893123456789412345678951234567896123
4567897123456789812345678991234567890123456789112345678921234567
89312345678941234567895123456789612345}
Detailed information
DescriptionItem
The setting status of SNMP Agent:Install
Enable, Disable
The IP address of the registered SNMP manager. The IP address divided by periods (.) is an
IPv4 address, and the IP address divided by colons (:) is an IPv6 address.
Manager
The number of the registered SNMP managers.Num. of Managers
The registered community name.Community
The IP address where the trap of community is reported. The IP address divided by periods (.)
is an Ipv4 address, and the IP address divided by colons (:) is an Ipv6 address.
Trap
The number of traps reported.Num. of Traps
The number of registered communities.Num. of Communities
The setting of system group information (Name, Contact, and Location).System Group
SNMP API descriptions 183