HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
This information is output only when All Thresholds is configured.
The type of rate for All ThresholdsMode
IOPS: the I/O rate
KB/s: the transfer rate
This information is output only when All Thresholds is configured.
[Perf Ctl] Set Ctrl Kind
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Ctl],Set Ctrl Kind,Kind=WWN,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information
DescriptionParameter
Indicates that you switched a definition of the server priority by a port without configuring
All Thresholds.
Kind=Port
Indicates that you switched a definition of the server priority by a port with configuring All
Thresholds.
Kind=All Port
Indicates that you switched a definition of the server priority by a WWN.Kind=WWN
This information is output whichever All Thresholds is configured or not.
[Perf Ctl] Set Prio Port
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Ctl],Set Prio Port,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Priority,Use,Threshold/Upper Limit,Mode}
=[{1A,Non-Prio,Enable,XXXXXXXX,IOPS}],Num. of Ports=1
Detailed Information
DescriptionItem
A name of the portPort
An attribute specified to the portPriority
Prio: a prioritized port
Non-Prio: a non-prioritized port
When the port is a prioritized port, this information indicates whether a threshold is specified
or not.
Use
When the port is a non-prioritized port, this information indicates whether an upper limit is
specified or not.
Enable: specified
Disable: not specified
When the port is a prioritized port, this information indicates the threshold.Threshold/Upper Limit
When the port is a non-prioritized port, this information indicates the upper limit.
This information is output only when a threshold or an upper limit is specified.
186 Audit log examples