HP XP P9000 Audit Log User and Reference Guide

=[{Add New Group,XXXXXXXXXXXXXXXX,Non-Prio,XXXXXXXX,IOPS},
++WWN=[0xXXXXXXXXXXXXXXXX,0xXXXXXXXXXXXXXXXX],Num. of WWNs=2],
+Num. of PFC Group=1
Detailed Information
DescriptionItem
An executed operationUpdate Mode
Add New Group: Added a new PFC group.
Add WWN: Added an HBA to the PFC group
Delete WWN: Deleted an HBA from the PFC group
A PFC group namePFC Group
An attribute specified to the HBAPriority
Prio: a prioritized WWN
Non-Prio: a non-prioritized WWN
This attribute is applied to all HBAs in the PFC group.
This information is output only when you add a new PFC group.
When an attribute specified to the PFC group is Non-Prio, this information indicates an upper
limit of the HBAs in the PFC group.
Upper Limit
This information is output only when you add a new PFC group.
The type of rate when you specify an upper limit.Mode
IOPS: the I/O rate
KB/s: the transfer rate
This information is output only when you add a new PFC group.
WWNs of HBAs in the PFC groupWWN
A WWN is a 16-digit number in the hexadecimal format.
All WWNs are output for this item.
You can add up to 32 WWNs to a PFC group.
The number of WWNs of added or deleted HBAsNum. of WWNs
The number of PFC groups whose settings are changedNum. of PFC Group
[Perf Ctl] Update WWN
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Ctl],Update WWN,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Update Mode,WWN,Change PFC Name,Change WWN}
={Change WWN,0xXXXXXXXXXXXXXXXX,,0xXXXXXXXXXXXXXXXX},
Num. of WWNs=1
Detailed Information
DescriptionItem
An executed operationUpdate Mode
Change WWN: Changed an HBA.
Change Nickname: Changed a PFC name for a WWN
A WWN of the HBAWWN
Performance Control Descriptions 189