HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
A WWN is a 16-digit number in the hexadecimal format.
When you changed an HBA, the WWN before the change is output.
A PFC name for the HBAChange PFC Name
When you changed a PFC name for the HBA, the PFC name after the change is output.
An WWN of the HBA after the changeChange WWN
This information is output only when an HBA is changed.
The number of HBAs whose settings are changedNum. of WWNs
Spreadsheet descriptions
[Spreadsheet] CflSet End
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],CflSet End,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Spreadsheet] CflSet Start
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],CflSet Start,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Input,Output}={C:\Set_IN.spd,C:\Set_OUT.spd}
Detailed information
DescriptionParameter
Indicates the name of the input file.Input
Indicates the name of the output file.Output
[Spreadsheet] LUNM Operation
The Configuration File Loader log appears in the log file line. It is located between the line that
contains “Start” and the line contains “End.”
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],LUNM Operation,Start,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic information
DescriptionParameter
Start of the Configuration File Loader.Start
End of the Configuration File Loader.End
190 Audit log examples