HP XP P9000 Audit Log User and Reference Guide

[Spreadsheet] VR Operation
The Configuration File Loader log appears in the log file line. It is located between the line that
contains "Start" and the line contains "End".
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],VR Operation,Start,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information
DescriptionParameter
Start of the Configuration File LoaderStart
End of the Configuration File LoaderEnd
Continuous Access Synchronous descriptions
[Cnt Ac-S] Change Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Change Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Max Initial Copy,CU Activity,Path Blockade Watch(s),
Path Blockade SIM Watch(s),Service SIM}={128,Enable,45,070,
Not Report}
+{LDKC,CU,Service SIM,PPRC Support,SCP Time(s),Max Initial Copy}
=[{0x00,0x00,Not Report,Yes,518400,04},
{0x00,0x01,Not Report,Yes,518400,04},
{0x00,0x02,Not Report,Yes,518400,04},
{0x00,0x03,Not Report,Yes,518400,04},
{0x00,0x04,Not Report,Yes,518400,04},(snip)-(snip)],
Num. of CUs=255
Detailed information
DescriptionItem
The maximum number of initial copy operations set. (1 to 512)Max Initial Copy
Indicates whether the parallel operation of initial copy by CU is enabled or not.CU Activity
Enable or Disable will appear.
The path blockade watch period setting (in seconds).Path Blockade Watch(s)
The path blockade SIM watch period setting (in seconds).Path Blockade SIM
Watch(s)
Indicates whether the remote copy related SIM is reported or not.Service SIM
Report, Not Report
The LDKC number.LDKC
The CU number of the connected CU.CU
Indicates whether to report the remote copy-related SIM.Service SIM
Report, Not Report
Indicates whether the host supports PPRC.PPRC Support
Continuous Access Synchronous descriptions 191