HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The port number, host group number and LUN of the primary volume in the restored pair
sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the restored
pair sequentially.
S-VOL(Port-G-ID-LUN)
The fence level set (the condition that MCU rejects Write to the primary volume).Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at a time).Copy Pace
The priority of restoring operation set (scheduling order).Priority
Indicates whether to change a Continuous Access Synchronous pair to an ESAM pair.Change ESAM
Yes: Change to ESAM pair. No: Keep Continuous Access Synchronous pair as it is.
The Quorum Disk ID that the ESAM pair uses. This value is output only when Change
ESAM is set to Yes.
Quorum Disk ID
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of restored pairs.Num. of Pairs
[Cnt Ac-S] Pairsplit-r
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Pairsplit-r,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Type,S-VOL Write,
Kind,Result}
=[{1A-0x00-0x000,1B-0x00-0x000,P-VOL,Disable,S-VOL,Normal end},
{1A-0x00-0x001,1B-0x00-0x001,P-VOL,Disable,S-VOL,Normal end},
(snip)
-(snip)],Num. of Pairs=xx
Detailed information
DescriptionItem
The port number, host group number, and LUN of the primary volume in the split pair
sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number, and LUN of the secondary volume in the split pair
sequentially.
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary site.Type
P-VOL: Primary volume, S-VOL: Secondary volume
Indicates whether writing to the secondary volume is enabled.S-VOL Write
Enable: Writing is enabled
Disable: Writing is disabled
The suspend type setting.Kind
P-VOL Failure: Writing to the P-VOL is disabled
S-VOL: Writing to the P-VOL is enabled
194 Audit log examples