HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The maximum number of initial copy operations setting (1 to 512).Max Initial Copy
Indicates whether the parallel operation of initial copy by CU is enabled or not.CU Activity
Enable or Disable will appear.
The path blockade watch period setting. The unit is second.Path Blockade Watch(s)
The path blockade SIM watch period setting. The unit is second.Path Blockade SIM
Watch(s)
Indicates whether the remote copy related SIM is reported or not.Service SIM
Report, Not Report
The LDKC number.LDKC
The CU number of the CU on the primary site.CU
Indicates whether the remote copy related SIM is reported or not.Service SIM
Report, Not Report
Indicates whether the host supports PPRC or not.PPRC Support
Yes: Support, No: Not support
The SCP delay time when the pair is suspended. The unit is second.SCP Time(s)
The number of parallel operation(s) of initial copy by CU. (1 to 16)Max Initial Copy
The number of CUs setting.Num. of CUs
[Cnt Ac-S Z] Change Pair Option
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Change Pair Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{M-VOL(LDKC:CU:LDEV),Fence Level,CFW,Result}
=[{0x00:0x00:0x00,Never,Copy to R-VOL,Normal end},
{0x00:0x01,Never,Copy to R-VOL,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the main volume where the pair option is changed.M-VOL(LDKC:CU:LDEV)
The changed fence level (the condition that MCU rejects the write operation to the main
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
Indicates whether the setting to copy the CFW data to the remote volume is enabled or
not.
CFW
Only M-VOL: Copy to main volume only is enabled
Copy to R-VOL: Copy to main and remote volume is enabled
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
Continuous Access Synchronous Z descriptions 197