HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
The master journal number.M-JNL
The restore journal number.R-JNL
The error level.Error Level
LU: volume level, Mirror: mirror level
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of changed pairs.Num. of Pairs
[Cnt Ac-J] R-Cmd.Dev.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],R-Cmd.Dev.,Assign,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL,MirrorID,R-Cmd.Dev.(LDKC:CU:LDEV),Result}
=[{0x00,0x001,0x01, 0x00:0x12:0x34,Normal end},
{0x00,0x010,0x02,0x00:0x56:0x78,Normal end}],
Num. of Mirrors=2
Basic information
DescriptionParameter
The remote command device is assigned.Assign
The remote command device is released.Release
Detailed information
DescriptionItem
The LDKC number to which the journal belongs.LDKC
The journal number.JNL
The mirror ID.MirrorID
The LDKC, CU, and LDEV numbers of the remote command device.R-Cmd.Dev.(LDKC:CU:LDEV)
The hyphen (-) displays under the following conditions:
• When assigning a remote command device without specifying a remote command
device as a parameter.
• When releasing a remote command device.
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of mirrors changed.Num. of Mirrors
Continuous Access Journal descriptions 207