HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
The LDKC number to which the journal belongs.LDKC
The journal number.JNL
The mirror ID.MirrorID
The speed of initial copy.
Low: Low speed, Medium: Medium speed, High: High speed
Copy Pace
The path blockade watch period setting. The units are minutes, hours or days. If it is set to 30
minutes, it will be 30 (min.).
Path
Watch Time
Indicates whether to transfer the path blockade watch period of the master journal to the restore
journal.
Forward Path
Watch Time
Yes: Transfer, No: Do Not Transfer.
The transfer speed of the communication line. The unit is megabits per second (Mbps).Transfer Speed (Mbps)
Indicates the operation mode when Delta resync operation have failed.Delta resync Failure
Entire: Copy the entire data volume, None: Do not copy the data volume
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
xxxx: Part code, yyyyy: Error code
The number of mirrors.Num. of Mirrors
[Cnt Ac-J Z] Clear-SIM
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],Clear-SIM,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Cnt Ac-J Z] Delete-Pair
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],Delete-Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,
S/N,CTRLID,Type,Range,Delete Mode,Result}
=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,65432,5,
P-VOL,Volume,Normal,Normal end},(snip)
-{0x00:0x00:0x02,0x00:0x20:0x02,0x00,65432,5,P-VOL,Volume,
Normal,Normal end},Num.of Pairs=3
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume.P-VOL(LDKC:CU:LDEV)
If the LDKC:CU:LDEV is set using a spreadsheet and the Type is S-VOL, N/A will be
output for both CU and LDEV numbers.
The LDKC, CU, and LDEV numbers of the secondary data volume.S-VOL(LDKC:CU:LDEV)
210 Audit log examples