HP XP P9000 Audit Log User and Reference Guide

+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,M-JNL,R-JNL,
Error Level,CFW,Result}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x03,
0x001,0x002,Volume,Only P-VOL,Normal end},(snip)
-{0x00:0x00:0x02,0x00:0x20:0x02,0x03,0x001,0x002,Volume,
Only P-VOL,Normal end},Num. of Pairs=3
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the primary data volume.P-VOL(LDKC:CU:LDEV)
The LDKC, CU, and LDEV numbers of the secondary data volume.S-VOL(LDKC:CU:LDEV)
The mirror ID.MirrorID
The master journal number.M-JNL
The restore journal number.R-JNL
The error level. Mirror: Mirror level, Volume: Volume levelError Level
Indicates whether the setting to copy the CFW data to the secondary data volume is
enabled or not.
CFW
Only P-VOL: Copy to the primary data volume only is enabled.
Copy To S-VOL: Copy to the primary data volume and the secondary data volume is
enabled.
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of pairs.Num. of Pairs
[Cnt Ac-J Z] R-Cmd.Dev.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-J Z],R-Cmd.Dev.,Assign,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC,JNL,MirrorID,R-Cmd.Dev.(LDKC:CU:LDEV),Result}
=[{0x00,0x001,0x01, 0x00:0x12:0x34,Normal end},
{0x00,0x010,0x02,0x00:0x56:0x78,Normal end}],
Num. of Mirrors=2
Basic information
DescriptionParameter
The remote command device is assigned.Assign
The remote command device is released.Release
Detailed information
DescriptionItem
The LDKC number to which the journal belongs.LDKC
The journal number.JNL
The mirror ID.MirrorID
214 Audit log examples