HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
Set: Set to the fixed parity group, Release: Set to the normal parity group.
ID of the parity group whose settings are changed.PG
The number of parity groups whose settings are changed.Num. of PGs
[Auto LUN] Set Migration Vol
This logged information indicates that the migration was only requested but not completed.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Auto LUN],Set Migration Vol,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Instruction,SourceLDEV,TargetLDEV,OwnerID,Result}
=[{Create,0x00:0x00:0x00,0x00:0x00:0x01,0xFF,Normal end},
{Create,0x00:0x00:0x02,0x00:0x00:0x03,0xFF,Normal end},
{Create,0x00:0x00:0x04,0x00:0x00:0x05,0xFF,Normal end},
{Create,0x00:0x00:0x06,0x00:0x00:0x07,0xFF,Normal end}],
Num. of LDEVs =4
Detailed information
DescriptionItem
Indicates that the manual migration plan is set or deleted; Create: Set, Delete: DeletedInstruction
The logical volume ID of the migration source. The number on the left of the colon is an LDKC
number, the number between the colons is a CU number, and the number on the right of the
colon is an LDEV number.
SourceLDEV
The logical volume ID of the migration target. The number on the left of the colon is an LDKC
number, the number between the colons is a CU number, and the number on the right of the
colon is an LDEV number. This value is output only when the manual migration plan is set.
TargetLDEV
The application that sets this migration plan.OwnerID
When a migration plan is set from the Auto LUN window, “00” is output. For a migration plan
set by another application, the ID of the application is output.
The result of operation.Result
Normal end: Normal end, Error (xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of manual migration plans set and deleted.Num. of LDEVs
[Auto LUN] Set Plan Condition
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Auto LUN],Set Plan Condition,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SetType,StartTime,TimeRequiredMax(min.),AvailabilityMax(%),VolumeMax}
=[{Customize,04:00,60,50,1}],Num. of Data = 1
Detailed information
DescriptionItem
The executed operation.SetType
228 Audit log examples