HP XP P9000 Audit Log User and Reference Guide

5 Audit log examples of commands sent from the host
This chapter provides examples and descriptions of the audit logs produced by commands sent
from hosts or computers using the RAID Manager. The descriptions are listed alphabetically by
function name and operation name. For detailed information on the version numbers in log output
examples, see Table 4 (page 18).
Config Command
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,Out-of-band,uid=user-name,
196,,[Config Command],,,Accept,from=host-name,,Seq.=xxxxxxxxxx
+0001020300000000 0000000000000000
+0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF 0123456789ABCDEF
• Out-of-band
The computer using the RAID Manager.
• from=host-name
The name of the host that sent the command.
• Detailed Information
The commands and the parameters that the storage system received from the host are output.
The meaning of the output information is not exhibited.
FC-SP
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,In-band OPEN,<Host>,,,
[FC-SP],,,Normal end,from=xxxxxxxxxxxxxxxx,,Seq.=xxxxxxxxxx
• In-band OPEN
The host is an open-system host.
• from=xxxxxxxxxxxxxx
WWN of the host that sent the command.
User Auth
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,In-band OPEN,uid=user-name,
195,,[User Auth],Login,,Normal end,from=xxxxxxxxxxxxxxxx,
AP=0xXXXX,Seq.=xxxxxxxxxx
07xx,YYYY/MM/DD,HH:MM:SS.xxx,+09:00,In-band OPEN,uid=user-name,
195,,[User Auth],Logout,,Normal end,from=xxxxxxxxxxxxxxxx,
AP=0xXXXX,Seq.=xxxxxxxxxx
• In-band OPEN
The host is an open-system host.
• from=xxxxxxxxxxxxxx
WWN of the host that sent the command.
• AP=0xXXXX
Internal ID used by the host and the storage system.
236 Audit log examples of commands sent from the host