HP XP P9000 Audit Log User and Reference Guide

Table 31 Remote Copy > Continuous Access Journal Z
Audit Log OutputGUI operation
Operation NameFunction NameDescriptionSubmenu
Journal-Vol
1
Cnt Ac-J ZEdit JNL VolumesJournal Operation
Change-JNL-Option
1
Cnt Ac-J ZChange JNL Option
Journal-Vol
1
Cnt Ac-J ZDelete JNL Groups
Change-Mirror-Option
1
Cnt Ac-J ZChange Mirror Option
Suspend-Pair
1
Cnt Ac-J ZSuspend Pair
Resume-Pair
1
Cnt Ac-J ZResume Pair
Delete-Pair
1
Cnt Ac-J ZDelete Pair
Journal-Vol
1
Cnt Ac-J ZRemove JNL from EXCTG
(Force)
R-Cmd.Dev.
1
Cnt Ac-J ZAssign Remote Command
Device
R-Cmd.Dev.
1
Cnt Ac-J ZRelease Remote
Command Device
Add-Pair
1
Cnt Ac-J ZAdd PairPair Operation
Suspend-Pair
1
Cnt Ac-J ZSuspend Pair
Resume-Pair
1
Cnt Ac-J ZResume Pair
Delete-Pair
1
Cnt Ac-J ZDelete Pair
Pair-Option
1
Cnt Ac-J ZChange Pair Option
Add RCURCUAdd Disk Controller (DKC)DKC Operation
Change RCU OptionChange Disk Controller
(DKC) Option
Delete RCUDelete Disk Controller
(DKC)
Add Path
1, 2
Add Path
Delete Path
1, 2
Delete Path
Edit Ports(Attr)PROVChanging port attribute
(Target, Initiator, RCU
Target)
System-Option
1
Cnt Ac-J ZChange System OptionOptional Operation
System-Option
1
Cnt Ac-J ZChange SIM Report
Clear-SIM
1
Cnt Ac-J ZClear SIM
Edit-EXCTG
1
Cnt Ac-J ZAdd JNL to EXCTG
Remove JNL from EXCTG
EXCTG Operation
1
When you apply two or more settings of the same type to the storage system at the same time, the log information
is output as one entry.
2
If one or more settings end abnormally when you have applied at one time, the output log information is Error, not
Warning.
258 Audit log user operations