HP XP P9000 Audit Log User and Reference Guide
Table Of Contents
- HP XP P9000 Audit Log User and Reference Guide
- Contents
- 1 Introduction
- 2 Using audit logs
- 3 Quick reference
- 4 Audit log examples
- Audit Log descriptions
- ACM descriptions
- BASE descriptions
- [BASE] Certificate Update
- [BASE] Control Panel Backup
- [BASE] Control Panel Restore
- [BASE] Create Conf Report
- [BASE] Delete CVAE Info
- [BASE] Delete Reports
- [BASE] Delete Tasks
- [BASE] Disable Auto Delete
- [BASE] Edit SIM Syslog Serv
- [BASE] Edit Storage System
- [BASE] Enable Auto Delete
- [BASE] Entry Tasks
- [BASE] Environment Setting
- [BASE] HCSSO Authentication
- [BASE] HCSSO SetOneTimeKey
- [BASE] Login
- [BASE] Logout
- [BASE] Release HTTP Block
- [BASE] Resume Tasks
- [BASE] Set CVAE Info
- [BASE] Set Up HTTP Block
- [BASE] Suspend Tasks
- [BASE] Unlock Forcibly
- [BASE] Update SMIS CrtFiles
- [BASE] Upload SMIS ConfFile
- Parallel Access Volumes descriptions
- E-Mail descriptions
- Compatible FlashCopy descriptions
- ESAM descriptions
- Information descriptions
- Install descriptions
- [Install] Add Host Group
- [Install] Add LU Path
- [Install] Add WWN
- [Install] All Config
- [Install] Backup Config
- [Install] Change Host Group
- [Install] Change WWN
- [Install] Cache Residency Prestaging
- [Install] Define Config.
- [Install] Delete DKC WWN
- [Install] Delete Host Group
- [Install] Delete LU Path
- [Install] Delete WWN
- [Install] Dku Emulation
- [Install] FlashDrive ORM Value
- [Install] Force Reset
- [Install] Format
- [Install] Format Stop
- [Install] Initialize ORM Value
- [Install] Install
- [Install] Install CV
- [Install] Machine Install Date
- [Install] Make LUSE
- [Install] Make Volume
- [Install] Micro Program
- [Install] MP Install
- [Install] M/F DCR
- [Install] Open DCR
- [Install] Release LUSE
- [Install] Remove
- [Install] Restore Config.
- [Install] Set Battery Life
- [Install] Set Channel Speed
- [Install] Set CommandDev
- [Install] Set CommandDevSec
- [Install] Set DevGrpDef
- [Install] Set Fibre Address
- [Install] Set Fibre Topology
- [Install] Set Host Mode
- [Install] Set IP Address
- [Install] Set Security Switch
- [Install] Set Subsystem Time
- [Install] Set UserAuth
- [Install] System Option
- [Install] System Tuning
- [Install] Update Config
- [Install] Volume to Space
- Local Replication Descriptions
- [Local Replication] Add Reserve VOLs
- [Local Replication] Create pairs
- [Local Replication] Delete pairs
- [Local Replication] Edit Options
- [Local Replication] Edit SCP Time
- [Local Replication] Release Reserved CTG
- [Local Replication] Remove Reserve VOLs
- [Local Replication] Reserve CTG
- [Local Replication] Resync pairs
- [Local Replication] Split pairs
- [Local Replication] Suspend pairs
- Maintenance descriptions
- [Maintenance] Blockade
- [Maintenance] Correction Copy
- [Maintenance] Drive Interrupt
- [Maintenance] Format
- [Maintenance] Format Stop
- [Maintenance] MP Restore
- [Maintenance] PCB Restore
- [Maintenance] Pre QuickFormat Stop
- [Maintenance] Quick Format
- [Maintenance] Replace
- [Maintenance] Restore
- [Maintenance] Restore Data
- [Maintenance] Set Battery Life
- [Maintenance] Size Change
- [Maintenance] Spare Disk
- [Maintenance] Switch SVP
- [Maintenance] Transfer Config
- [Maintenance] Type Change
- [Maintenance] Verify
- [Maintenance] Verify Stop
- Monitor Descriptions
- Performance Monitor descriptions
- Program Product Key (PP KEY) descriptions
- Provisioning descriptions
- [PROV] Add Host Group
- [PROV] Add Hosts
- [PROV] Add LU Path
- [PROV] Add LUN Paths
- [PROV] Add WWN
- [PROV] Assign MP Blade
- [PROV] Block LDEVs
- [PROV] Change Host Group
- [PROV] Complete SIMs
- [PROV] Create Host Groups
- [PROV] Create LDEVs
- [PROV] Create Resource Grps
- [PROV] Create/Expand Pools
- [PROV] Delete Host Group
- [PROV] Delete Host Groups
- [PROV] Delete LDEVs
- [PROV] Delete Login WWNs
- [PROV] Delete LU Path
- [PROV] Delete LUN Paths
- [PROV] Delete Resource Grps
- [PROV] Delete WWN
- [PROV] DRU Expiration-Lock
- [PROV] Edit Cmd Dev(Auth)
- [PROV] Edit Cmd Dev(DevGrp)
- [PROV] Edit Cmd Dev(Sec)
- [PROV] Edit Command Devices
- [PROV] Edit DRU Attribute
- [PROV] Edit Host
- [PROV] Edit Host Grps(Mode)
- [PROV] Edit Host Grps(Name)
- [PROV] Edit LDEVs(tier)
- [PROV] Edit LDEV Tier Rank
- [PROV] Edit MP Blades
- [PROV] Edit Ports(Address)
- [PROV] Edit Ports(Attr)
- [PROV] Edit Ports(Security)
- [PROV] Edit Ports(Speed)
- [PROV] Edit Ports(Topology)
- [PROV] Edit Resource Grp
- [PROV] Edit Tiering Policy
- [PROV] Edit VR Attribute
- [PROV] Edit V-VOL Option
- [PROV] Edit/Delete Pools
- [PROV] Edit/Delete UUIDs
- [PROV] Expand V-VOLs
- [PROV] Format LDEVs
- [PROV] Format LDEVs(H)
- [PROV] Format LDEVs(Q)
- [PROV] Initialize Pools
- [PROV] LDEV Name
- [PROV] Make LUSE
- [PROV] Map Virtual HostGrp
- [PROV] Map Virtual LDEV
- [PROV] Monitor Pools
- [PROV] Move Resources
- [PROV] Pool Name
- [PROV] Reclaim Zero Pages
- [PROV] Release HostReserved
- [PROV] Release LUSE
- [PROV] Relocate Pool
- [PROV] Remove Hosts
- [PROV] Restore LDEVs
- [PROV] Restore Pools
- [PROV] Set Channel Speed
- [PROV] Set CommandDev
- [PROV] Set CommandDevSec
- [PROV] Set DevGrpDef
- [PROV] Set FCSP Host
- [PROV] Set FCSP Port Info
- [PROV] Set FCSP Port Switch
- [PROV] Set FCSP Target
- [PROV] Set Fibre Address
- [PROV] Set Fibre Topology
- [PROV] Set Host Mode
- [PROV] Set PageTieringLevel
- [PROV] Set Security Switch
- [PROV] Set SSID
- [PROV] Set UserAuth
- [PROV] Shrink Pool
- [PROV] Stop Monitoring
- [PROV] Stop Reclm ZeroPages
- [PROV] Stop Relocating
- [PROV] Stop Shrinking Pool
- [PROV] VTOC
- RCU descriptions
- Remote Maintenance descriptions
- Business Copy descriptions
- Business Copy Z descriptions
- Snapshot descriptions
- SNMP API descriptions
- Performance Control Descriptions
- Spreadsheet descriptions
- Continuous Access Synchronous descriptions
- Continuous Access Synchronous Z descriptions
- Continuous Access Journal descriptions
- Continuous Access Journal Z descriptions
- [Cnt Ac-J Z] Add-Pair
- [Cnt Ac-J Z] Change-JNL-Option
- [Cnt Ac-J Z] Change-Mirror-Option
- [Cnt Ac-J Z] Clear-SIM
- [Cnt Ac-J Z] Delete-Pair
- [Cnt Ac-J Z] Edit-EXCTG
- [Cnt Ac-J Z] Journal-Vol
- [Cnt Ac-J Z] Journal-Vol
- [Cnt Ac-J Z] Pair-Option
- [Cnt Ac-J Z] R-Cmd.Dev.
- [Cnt Ac-J Z] Resume-Pair
- [Cnt Ac-J Z] Suspend-Pair
- [Cnt Ac-J Z] System-Option
- External Storage descriptions
- [Ext Stor] Add External Volumes
- [Ext Stor] Assign MP Blade
- [Ext Stor] Delete ES VOLs
- [Ext Stor] Disconnect ES Paths
- [Ext Stor] Disconnect ES VOLs
- [Ext Stor] Edit ES Path Config
- [Ext Stor] Edit ES VOLs
- [Ext Stor] Edit External WWNs
- [Ext Stor] Merge ES Path Grps
- [Ext Stor] ProfileUpgrade
- [Ext Stor] Reconnect ES Paths
- [Ext Stor] Reconnect ES VOLs
- [Ext Stor] Split ES Path Grp
- Auto LUN descriptions
- Cache Partition descriptions
- Volume Shredder descriptions
- Volume Security for Mainframe Descriptions
- Compatible XRC descriptions
- HDD Easy Replace descriptions
- 5 Audit log examples of commands sent from the host
- 6 Audit log examples for encryption key operations
- [ENC] Backup Keys
- [ENC] Backup Keys to File
- [ENC] Backup Keys to Serv
- [ENC] Create Keys
- [ENC] Create Keys On Serv
- [ENC] Delete Keys
- [ENC] Delete Keys on Serv
- [ENC] DwnGrd Format of Enc
- [ENC] Edit Encryption
- [ENC] Edit Password Policy
- [ENC] Generate Keys on Srv
- [ENC] Restore Keys
- [ENC] Restore Keys fr File
- [ENC] Restore Keys fr Serv
- [ENC] Set keys to DKC
- [ENC] Setup Key Mng Serv
- 7 Audit log examples for single sign-on
- 8 Support and other resources
- A Audit log user operations
- B Audit log SVP operations
- C Conventions
- D Audit log GUI reference
- Glossary
- Index
![](/manual/hp/hp-p9500-upgrade-dku-disk-unit-rack/hp-xp-p9000-audit-log-user-and-reference-guide/images/img-265.png)
Table 54 Audit Log Transfer Window
DescriptionItem
Specify whether to transfer the audit log file to the primary FTP server.Output to Primary
Server
• Enable: Transfers the file.
• Disable: Does not transfer the file.
Set an IP address for the primary FTP server. Once you set Output to Primary Server to Enable,
IP becomes available. The default IP address has been entered, so change it as needed.
Primary Server
Setting
You can set either IPv4 address or IPv6 address for IP address. However, only IPv4 address is
available when the operating system of your SVP is Windows XP.
• To set an IPv4 address, select IPv4. For IP, enter four integers in the range of 0 to 255 (for
example, nnn.nnn.nnn.nnn, where n is a number). Only enter numbers. Do not enter the
intervening periods.
• To set an IPv6 address, select IPv6. For IP, enter eight hexadecimal numbers in the range of
0 to FFFF (for example, hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh, where h is
a hexadecimal digit). Only enter hexadecimal numbers. Do not enter the intervening colons.
Set the UserID and Password to log in to the primary FTP server. Enter up to 256 alphanumeric
characters and symbols (ASCII codes) for user ID and password.
Primary Server Login
User
Set the folder location to save the audit log file. The folder location should be relative to a home
directory of a FTP server user. The default setting (/) is the home directory. Enter up to 256
alphanumeric characters and symbols (ASCII codes) for the output folder.
Primary Server
Output Folder
When you click Transfer, the audit log file is transferred to the primary FTP server according to
the settings selected on the Audit Log Transfer window. You can transfer the current audit log
file without waiting for the audit log file to reach the threshold size for automatic transfer.
Transfer to Primary
Server
Specify whether to transfer the audit log file to the secondary FTP server.Output to Secondary
Server
• Enable: Transfers the file.
• Disable: Does not transfer the file.
Set an IP address for the secondary FTP server. Once you set Output to Secondary Server to
Enable, IP becomes available. The default IP address has been entered, so change it as needed.
The restriction for the available values is the same as that of Primary Server Setting.
Secondary Server
Setting
Set the User ID and Password to log in to the secondary FTP server. The restriction for the
available values is the same as that of Primary Server Login User.
Secondary Server
Login User
Set the folder location to save the audit log file. The folder location should be relative to a home
directory of a FTP server user. The default setting and the restriction for the available values are
the same as those of Primary Server Output Folder.
Secondary Server
Output Folder
Audit Log Transfer window 273