HP XP P9000 Audit Log User and Reference Guide

4 Audit log examples
This topic provides examples and descriptions of the audit logs produced by each function and
operation that can be performed with Remote Web Console and SVP. The descriptions are listed
alphabetically by function name and operation name. For detailed information on the version
numbers in log output examples, see Table 4 (page 18).
Audit Log descriptions
[AuditLog] Audit Log buffer
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[AuditLog],Audit Log buffer,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Option,Set,Result}
=[{Audit Log buffer,Enable,Normal}],Num. of Modes=1
Detailed information
DescriptionItem
The operation name (Audit Log buffer)Option
The setting status. Disable or Enable will appearSet
The result of the settingResult
Normal: Normal end. Error: Abnormal end
The number of options configuredNum. of Modes
[AuditLog] Create File
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,<system>,,,
[AuditLog],Create File,SVP,Warning,,,Seq.=xxxxxxxxxx
Basic information
The parameter AuditLog indicates that the audit log file has been reproduced.
DescriptionParameter
Indicates that the audit log file 1 has been reproducedSVP
Indicates that the audit log file 2 has been reproducedDKC
[AuditLog] DKCAuditLog was lost
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,<system>,,,
[AuditLog],DKCAuditLog was lost,,Error,,,Seq.=xxxxxxxxxx
[AuditLog] Over MaxLine
This information appears in the syslog file only.
42 Audit log examples