HP XP P9000 Audit Log User and Reference Guide

Basic information for example 2
DescriptionParameter
The window that shows the progress of LDEV formatting has closed.Progress Close
Quick Format is selected.Quick Format
The window that shows the progress of preparing for Quick Format has closed.Quick Format Close
Note: No parameter is output for any case other than those described in this table.
Detailed information for example 2
DescriptionItem
The Disk Adapter mounting location.Disk Adapter (DKA)
The type of Disk Adapter.Kind
The number of Disk Adapters.Num. of Disk Adapters
The mounting location of Disk UnitDisk Unit (DKU)
The type of DKUKind
The number of Disk UnitNum. of Disk Unit (DKU)s
The parity group number.PG
The RAID LevelRAID Level
The type of the driveDrive Type
The protection levelProtection Level
The emulation typeEmulation
The RAID concatenated parity group number. A hyphen (-) is indicated when the parity group
is not RAID concatenated.
Concatenation
The status of the encryption settingEncryption
0-31: Encryption Key ID Disable: Disabled
The LDKC number, the CU number, and the LDEV numberLDKC:CU:LDEV
The capacity of CVSize
The unit of the capacity of CVUnit
The status of the system disk settingSystem Disk
Disable or Enable will appear.
The storage system IDSSID
The ownership of the MPBMPB
The number of LDEVsNum. of LDEVs
The number of parity groupsNum. of PGs
The B4 numberB4
The spare drive numberSPARE
The number of spare drivesNum. of SPAREs
Install descriptions 83