HP XP P9000 Audit Log User and Reference Guide

Basic information for example 7
DescriptionParameter
Indicates a change in the IP address of the SVP.SVP
Indicates a change in the IP address of the SVP and the DKC.SVP&DKC
Detailed information for example 7
DescriptionItem
The installed location of the SVP.SVP
IP address in the SVP.IPAddress
The subnet mask in the SVP.Subnet Mask
The duplex status of the SVP.Use Duplex
Valid or Invalid will appear.
The kind of the duplex status.SVP Kind
Master SVP or Standby SVP will appear.
The status of IPv4 settings.IPv4
Valid or Invalid will appear.
The status of IPv6 settings.IPv6
Valid or Invalid will appear.
Master SVP details are provided in the format described below.M-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)IPv6(IPAddress, Subnet
Prefix length)
Standby SVP details are provided in the format described below.S-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)IPv6(IPAddress, Subnet
Prefix length)
Example 8: installing additional SM PP flag
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Install,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PP Flag=[(64KLDEV, SI/VM Extension1, FCV2, FCSE, DP, CoW, TPF),
(SI/VM Extension2, CoW Extension)],Num. of PP Flags=2
+Max Number of CUs=255
Detailed information for example 8
DescriptionItem
The flag of the program productPP Flag
The number of flags of the program productNum. of PP Flags
The maximum number of CUsMax Number of CUs
86 Audit log examples