HP XP P9000 Audit Log User and Reference Guide

[Install] Install CV
This logged information indicates that the formatting was only requested but not completed. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Install CV,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID,MPB}
=[{1-1,0x00:0x00:0x00,-,OPEN-V,10000,LBA,Disable,
0x0005,Auto}],Num. of LDEVs=1
Basic information
DescriptionParameter
Unformatted Install CV.Non Format
The window showing the progress of the LDEV formatting is closed.Progress Close
Quick Format is selected.Quick Format
The progress window of preparing for Quick Format is closed.Quick Format Close
NOTE: No parameter is output for any case other than those described in this table.
Detailed information
DescriptionItem
The parity group number.
E1-1: In case of an external volume. V1-1: In case of a virtual volume. X1-1: In case of a Thin
Provisioning volume.
PG
The LDKC, CU, and LDEV numbers.LDKC:CU:LDEV
The slot number.
A hyphen (-) is indicated for Install CV.
Slot
The emulation type.Emulation
The CV capacity.Size
The CV unit capacity.Unit
The setting status of the system disk. Disable or Enable will appear.System Disk
The storage system ID.SSID
The ownership of the MPB.MPB
The number of LDEVs.Num. of LDEVs
[Install] Machine Install Date
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Machine Install Date,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Date=YYYY/MM/DD HH:mm
Install descriptions 87