HP XP P9000 Audit Log User and Reference Guide

Detailed information
DescriptionItem
Indicates the date and the time of the setting in “YYYY/MM/DD HH: mm” format (YYYY: year,
MM: month, DD: day, HH: hour, mm: minute).
Date
[Install] Make LUSE
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Make LUSE,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LUSE(LDKC:CU:LDEV)=[{0x00:0x00:0x00,0x00:0x00:0x01,
0x00:0x00:0x02,0x00:0x00:0x03},{0x00:0x01:0x00,0x00:0x01:0x01,
0x00:0x01:0x02,0x00:0x01:0x03}],Num. of LUSEs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of several LDEVs combined into an LUSE volume. The
number indicated at the beginning represents the LDKC, CU, and LDEV numbers of the top
LDEV.
LUSE(LDKC:CU:LDEV)
The number of LUSE volumes configured.Num. of LUSEs
[Install] Make Volume
This logged information indicates that formatting the volume was requested but not completed. If
the operation does not require formatting, this logged information indicates that the volume was
created.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Make Volume,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID,MPB}
=[{1-1,0x00:0x14:0x00,-,OPEN-V,205440,LBA,Disable,0x0005,Auto}],
Num. of LDEVs=1
Basic information
DescriptionParameter
The Make Volume operation does not require the formatting.Non Format
The window showing the progress of the LDEV formatting has closed.Progress Close
Quick Format is selected.Quick Format
The window that shows the progress of preparing for Quick Format has closed.Quick Format Close
NOTE: No parameters are selected for any case other than those described in this table.
88 Audit log examples