HP XP P9000 Audit Log User and Reference Guide

[Install] Open DCR
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Open DCR,,Normal
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LDKC:CU:LDEV=0x00:0x00:0x00
++{Define,Mode,Prestaging,Start LBA,End LBA}
=[{Set,Bind,No,0,2015},{Set,Priority,Yes,3636,4175},
{Delete,-,-,3636,4175}],Num. of DCR Settings=3
Detailed information
DescriptionItem
The LDKC number, the CU number, and the LDEV number of the logical volume where Cache
Residency is set.
LDKC:CU:LDEV
The setting status of Cache Residency.Define
Set: set, Delete: cancel
The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.Mode
Bind: Bind mode, Priority: Priority mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash (-) when
Define is Delete.
Prestaging
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
The starting LBA number of the data which Cache Residency was set or canceled.Start LBA
The ending LBA number of the data which Cache Residency was set or canceled.End LBA
The number of Cache Residencies set or canceled.Num. of Cache
Residency Settings
[Install] Release LUSE
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Release LUSE,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+LUSE(LDKC:CU:LDEV)=[0x00:0x00:0x00,0x00:0x01:0x00],
Num. of LUSEs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the top LDEV where LUSE volumes are released.LUSE(LDKC:CU:LDEV)
The number of LUSE volumes released.Num. of LUSEs
[Install] Remove
Example 1: removing a channel adapter (CHA)
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{CHA,Kind}
Install descriptions 91