HP XP P9000 Audit Log User and Reference Guide

=[{CHA-1EU,16FC (Fibre )},{CHA-2QU,16FC (Fibre )}],
Num. of CHAs=2
Detailed information for example 1
DescriptionItem
The Channel Adapter mounting locationChannel Adapter
The kind of PCB mountedKind
The number of Channel AdaptersNum. of Channel
Adapters
Example 2: removing a Disk Adapter (DKA), an ECC Group or an LDEV
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{DKA,Kind}=[{DKA-1AL,DKF 4MP},{DKA-1LL,DKF 4MP},
{DKA-2ML,DKF 4MP},{DKA-2XL,DKF 4MP}],Num. of DKAs=4
+DKU=[DKU-01],Num. of DKUs=1
+PG=[1-6,1-7],Num. of PGs=2
+{B4,SPARE}=[{1,1}],Num. of SPAREs=1
Detailed information for example 2
DescriptionItem
The disk adapter mounting locationDisk Adapter
The type of Disk AdapterKind
The number of Disk AdaptersNum. of Disk Adapters
The Disk Adapter mounting locationDisk Unit
The number of disk drive chassisNum. of Disk Units
The parity group numberPG
The number of parity groupsNum. of PGs
The B4 numberB4
The spare drive numberSPARE
The number of spare drivesNum. of SPAREs
NOTE: Only the changed items will be output. The Detailed Information of the recovery process
will not be output when the removing process executed before the process has completed. However,
the setting of the recovery process will be output as the Detailed Information of the process when
the removing process executed before the recovery process has not completed.
Example 3: removing a cache memory module
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{CM,CMG,size,SSD0,SSD1}
=[{1CA/2CC,C16G,16384,BM64(64GB),0},{1CB/2CD,C16G,16384,
BM64(64GB),0},{1CE/2CG,C16G,16384,BM64(64GB),BM64(64GB)},
{1CF/2CH,C16G,16384,BM64(64GB),BM128(128GB)}],
Num. of CMs=4
+DCR available Size=512
+{CLPR,Cache size,DCR size,Extent Number}
92 Audit log examples