HP XP P9000 Audit Log User and Reference Guide

=[{CLPR0,84992,1024,16384}],Num. of CLPRs=1
+PP Flag=[(64KLDEV, SI/VM Extension1, FCV2, FCSE, DP, CoW, TI,
TPF),(SI/VM Extension2, CoW Extension)],Num. of PP Flags=2
+Max Number of CUs=64
Detailed information for example 3
DescriptionItem
The mounting location of the PCB for cache memoryCM
The capacity of the CMGCMG
The capacity of the cache memorySize
The size of the SSD0SSD0
The size of the SSD1SSD1
The number of the cache memoryNum. of CMs
The capacity of the Cache ResidencyDCR available size
The CLPR numberCLPR
The capacity of the cache memory allocated to CLPRCache size
The capacity of the Cache Residency allocated to CLPRDCR size
The number of extents allocated to CLPRExtent Number
The number of CLPRs.Num. of CLPRs
The flag of the program productPP Flag
The number of program product flagsNum. of PP Flags
The maximum number of CUsMax Number of CUs
Example 4: removing a power supply
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+DKCPS=[DKCPS-02,DKCPS-03],Num. of DKC PSs=2
Detailed information for example 4
DescriptionItem
The removed power supply.DKCPS
The number of power supplies.Num. of DKC PSs
Example 5: removing MPB
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
{MPB,Auto LDEV Assignment}
=[{MPB-1MB,Enable},{MPB-2MD,Enable},{MPB-1MF,Enable},
{MPB-2MH,Enable}],Num. of MPBs=4
Install descriptions 93