HP XP P9000 Audit Log User and Reference Guide

Detailed information for example 6
DescriptionItem
The installed location of the MPB.MPB
The attribute of auto LDEV assignment.Auto LDEV Assignment
Example 7: removing SVP
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,SVP,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{SVP}={SVP-OPTION}
+{IPAddress,Subnet Mask}={(123.456.789.123),(255.255.255.255)}
+Use Duplex=Invalid
+Svp Kind=Master SVP
+IPv4=Valid
+IPv6=Valid
+{M-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((111.222.333.444),(255.255.255.255)),
((1111:2222:3333:4444:5555:6666:7777:8888),(64))}
+{S-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((555.666.777.888),(255.255.255.255)),
((9999:AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:0000),(64))}
Basic information
DescriptionParameter
Indicates a change in the IP address of the SVP.SVP
Indicates a change in the IP address of the SVP and the DKC.SVP and DKC
Detailed information for example 7
DescriptionItem
The installed location of the SVP.SVP
IP address in the SVP.IPAddress
The subnet mask in the SVP.Subnet Mask
The duplex status of the SVP.Use Duplex
Valid or Invalid will appear.
The kind of the duplex status.SVP Kind
Master SVP or Standby SVP will appear.
The status of IPv4 settings.IPv4
Valid or Invalid will appear.
The status of IPv6 settings.IPv6
Valid or Invalid will appear.
Master SVP details are provided in the format described below.M-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet Mask)
94 Audit log examples