HP XP P9000 Audit Log User and Reference Guide

DescriptionItem
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)IPv6(IPAddress, Subnet
Prefix length)
Standby SVP details are provided in the format described below.S-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)IPv6(IPAddress, Subnet
Prefix length)
Example 8: removing SM PP flag
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Remove,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PP Flag=[(64KLDEV, SI/VM Extension1, FCV2, FCSE, DP, CoW, TI,
TPF),(SI/VM Extension2, CoW Extension)],Num. of PP Flags=2
+Max Number of CUs=64
Detailed information for example 7
DescriptionItem
The flag of the program productPP Flag
The number of program product flagsNum. of PP Flags
The maximum number of CUsMax Number of CUs
[Install] Restore Config.
Example 1
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Restore Config.,SVP and DKC,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic Information for Example 1
The SVP and DKC parameter indicates the configuration of SVP and DKC has been restored.
Example 2
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Restore Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx}
Detailed information for example 2
DescriptionItem
The new version number.New Ver.
The old version number.Old Ver.
[Install] Set Battery Life
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Battery Life,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Install descriptions 95