HP XP P9000 Audit Log User and Reference Guide

+Use Battery Life=Valid
+{Battery,Date,Remained Life}=[{BATTERY-1CA,YYYY/MM/DD,990},
{BATTERY-2CC,YYYY/MM/DD,990}],Num. of Batteries=2
Detailed information
DescriptionItem
The status of Battery life function set.Use Battery Life
Valid: Valid, Invalid: Invalid
The mounting location of the batteryBattery
Indicates the date of the setting in "YYYY/MM/DD" format (YYYY: year, MM: month, DD:
day)
Date
The remaining date of the battery shelf life.Remained Life
The number of batteriesNum of Batteries
[Install] Set Channel Speed
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Channel Speed,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Speed(Gbps)}=[{XX,1},{XX,2},{XX,Auto}],
Num. of Ports=3
Detailed information
DescriptionItem
The name of the port on which the channel speed is set.Port
The channel speed set.Speed(Gbps)
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
The number of ports where the channel speed is set.Num. of Ports
[Install] Set CommandDev
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set CommandDev,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDev}=[{0x00:0xXX:0xXX,Disable},
{0x00:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.LDKC:CU:LDEV
Indicates whether the command device setting is enabled or disabled.CommandDev
Disable or Enable will appear.
The number of logical volumes where the command device is set.Num. of LDEVs
96 Audit log examples