HP XP P9000 Audit Log User and Reference Guide

+{IPAddress,Subnet Mask}={(123.456.789.123),(255.255.255.255)}
+Use Duplex=Valid
+Svp Kind=Master SVP
+IPv4=Valid
+IPv6=Valid
+{M-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((111.222.333.444),(255.255.255.255)),
((1111:2222:3333:4444:5555:6666:7777:8888),(64))}
+{S-SVP IPv4(IPAddress,Subnet Mask),
IPv6(IPAddress,Subnet Prefix length)}
={((555.666.777.888),(255.255.255.255)),
((9999:AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:0000),(64))}
Basic information
DescriptionParameter
The SVP IP address change.SVP
The IP address change of the SVP and DKC.SVP&DKC
Detailed information
DescriptionItem
The SVP IP address.IPAddress
The subnet mask in SVP.Subnet Mask
Indicates whether the Duplex setting in SVP is valid or invalid.Use Duplex
Valid: Valid, Invalid: Invalid
The kind of duplicated SVP.SVP Kind
Master SVP: Master SVP, Standby SVP: Standby SVP.
The status of IPv4.IPv4
Valid: enabled, Invalid: disabled.
The status of IPv6.IPv6
Valid: enabled, Invalid: disabled.
Master SVP details are provided in the format described below.M-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)IPv6(IPAddress,Subnet Prefix
length)
Standby SVP details are provided in the format described below.S-SVP
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)IPv4(IPAddress,Subnet Mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)IPv6(IPAddress,Subnet Prefix
length)
[Install] Set Security Switch
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Security Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Install descriptions 99