HP XP7 Audit Log User and Reference Guide (H6F56-96001)

DescriptionItem
The number of storage system IDsNum. of SSIDs
The status of TPF Function settingsTPF Enable
ON: Enabled OFF: Disabled
The allocated number of MPLsNumber of MPLs
A hyphen (-) appears if the TPF Enable is OFF.
[Install] Update Config
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Update Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx}
Detailed Information
DescriptionItem
The new version numberNew Ver.
The old version numberOld Ver.
[Install] Volume to Space
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Volume to Space,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV}=[{1-1,0x00:0x00:0x01},{1-1-(1),
0x00:0x00:0x02}],Num. of LDEVs=2
Detailed Information
DescriptionItem
The parity group numberPG
E1-1: In case of an external volume
V1-1:In case of a virtual volume
X1-1: In case of a Thin Provisioning volume
The LDKC number, the CU number and the LDEV numberLDKC:CU:LDEV
The number of LDEVsNum. of LDEVs
Local Replication Descriptions
[Local Replication] Create pairs
Example 1: when the copy type is BC or BC Z
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Local Replication],Create Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=BC,Copy Pace=Faster,Split Type=Non Split
++{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MU,Result}
Local Replication Descriptions 103