HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information
DescriptionItem
The identity of the microprocessorMP
The number of microprocessors that were restoredNum. of MPs
[Maintenance] PCB Restore
Example
08xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,SVP,uid=maintenance,0,,
[Maintenance],PCB Restore,,Error,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PCB=[CACHE-2CC],Num. of PCBs=1
Detailed Information
DescriptionItem
The PCB.PCB
The number of PCBsNum. of PCBs
[Maintenance] Pre QuickFormat Stop
This log information is output when the Quick Format process is suspended.
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Pre QuickFormat Stop,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
Detailed Information
DescriptionItem
The parity group numberPG
E1-1: In case of an external volume
V1-1: In case of a virtual volume
X1-1: In case of a Thin Provisioning volume
The number of parity groupsNum. of PGs
The LDKC number, the CU number, and the LDEV numberLDEV
The number of LDEVsNum. of LDEVs
[Maintenance] Quick Format
The logged information indicates that the Quick Format operation was only requested but not
completed.
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Maintenance],Quick Format,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+PG=[1-1],Num. of PGs=1
Maintenance Descriptions 113