HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where
the setting information of Cache Residency cache is canceled.
LDKC:CU:LDEV
The starting cylinder number (CC) and the starting head number (HH) of the cancelled dataStart CC-HH
The ending cylinder number (CC) and the ending head number (HH). This number is output
when the ending cylinder and ending head are specified for the cancelled data.
End CC-HH
The number of logical volumes (for a mainframe system) where the setting information of
Cache Residency cache is cancelled
Num. of LDEVs
[Perf Mon] Delete Open DCR
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Mon],Delete Open DCR,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Start LBA,End LBA}
=[{0x00:0x00:0x00,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},
{0x00:0x00:0x00,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],
Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for an open system) where the
setting information of Cache Residency cache is canceled.
LDKC:CU:LDEV
The starting LBA number of the cancelled data.Start LBA
The ending LBA number of the cancelled data. This number is output when only the ending
LBA is specified for the cancelled data.
End LBA
The number of logical volumes (for an open system) where Cache Residency cache is
canceled.
Num. of LDEVs
[Perf Mon] Delete Unused WWNs
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Delete Unused WWNs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Perf Mon] Edit CU Monitor Mode
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit CU Monitor Mode,Enable,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+[LDKC:CU] = [0x00:0x00,0x00:0x01,0x00:0x02],Num. of CUs = 3
Basic Information
DescriptionParameter
The monitored CU is enabledEnable
120 Audit log examples