HP XP7 Audit Log User and Reference Guide (H6F56-96001)

++Port=[XX],Num. of Ports=1,
-Num. of WWNs=1
Detailed Information
DescriptionItem
The setting mode of WWNMode
Add WWN: Addition of HBA WWN, Delete WWN: Deletion of HBA WWN
The HBA WWNHBA WWN
The WWN nameWWN Name
The name of a target portPort
The number of target ports for the added or deleted WWNNum. of Ports
The number of added or deleted WWNsNum. of WWNs
[Perf Mon] Set M/F DCR
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Mon],Set M/F DCR,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Mode,Prestaging,Start CC-HH,End CC-HH}
=[{0x00:0x00:0x00,Bind,No,XXXXXX-XX,XXXXXX-XX},
{0x00:0x00:0x00,Priority,Yes,XXXXXX-XX,XXXXXX-XX}],
Num. of LDEVs=2
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the logical volume (for a mainframe system) where
the setting information of Cache Residency cache is added or changed.
LDKC:CU:LDEV
The setting mode of Cache Residency cacheMode
Bind: Bind, Priority: Priority
The prestaging targetPrestaging
No: No (disables the prestaging mode) Yes: Yes (enables the prestaging mode)
The starting cylinder number (CC) and the starting head number (HH) of the data resident
in Cache Residency cache
Start CC-HH
The ending cylinder number (CC) and the ending head number (HH) of the data resident in
Cache Residency cache
End CC-HH
The number of logical volumes (for a mainframe system) where the setting information of
Cache Residency cache is added or changed
Num. of LDEVs
[Perf Mon] Set Open DCR
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Perf Mon],Set Open DCR,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Mode,Prestaging,Start LBA,End LBA}
=[{0x00:0x00:0x00,Bind,No,XXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],
Num. of LDEVs=1
122 Audit log examples