HP XP7 Audit Log User and Reference Guide (H6F56-96001)

[PROV] Create/Expand Pools
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Create/Expand Pools,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,Pool Type,Multi Tier Pool,Warning Threshold(%),
Depletion Threshold(%),Subscription Limit(%),Tier Management,
Cycle Time,Monitoring Period,Monitoring Mode,Relocation Speed,
Pool Result}
=[{1,Thin Provisioning,Enable,20,70,100,Auto,24,00:00-23:59,
Continuous Mode,3,Normal end}],Num. of Pools=1
++{LDKC:CU:LDEV,External LDEV Tier Rank,LDEV Result}
=[{0x00:0x00:0x00,Middle/Internal,Normal end},
{0x00:0x00:0x01,Middle/Internal,Normal end},
{0x00:0x00:0x02,Middle/Internal,Normal end}],Num. of LDEVs=3
Detailed Information
DescriptionItem
The pool ID of the created or expanded poolPool ID
The pool type.Pool Type
Thin Provisioning: Thin Provisioning, Fast Snap: Fast Snap
Whether the multi-tier mode of the created or expanded pool is enabled or disabledMulti Tier Pool
Enable: Enabled, Disable: Disabled
If Pool Type is Fast Snap, a hyphen (-) is output.
The warning threshold of the usage rate of the created or expanded pool. The unit is indicated
as a percentage.
Warning Threshold(%)
The depletion threshold of the usage rate of the created or expanded pool. The unit is
indicated as a percentage.
Depletion Threshold(%)
If Pool Type is Fast Snap, or if the depletion threshold is not specified, a hyphen (-) is output.
The reserve amount of the created or expanded pool.Subscription Limit(%)
The unit is percent (%).
If the reserve amount is not specified, it outputs "Unlimited".
If Pool Type is Fast Snap, a hyphen (-) is output.
The auto control mode of the created or expanded poolTier Management
Auto: Auto, Manual: Manual
If Multi Tier Pool is anything other than Enable, a hyphen (-) is output.
The cycle of performance monitoring for the created or expanded poolCycle Time
0.5: every thirty minutes, 1: every one hour, 2: every two hours, 4: every four hours, 8:
every eight hours, 24: every twenty-four hours
If Tier Management is anything other than Auto, a hyphen (-) is output.
The monitoring period of the pool.Monitoring Period
Format: "H1:M1-H2:M2" H1: The time when the monitoring starts (hour) M1: The time when
the monitoring starts (minute) H2: The time when the monitoring ends (hour) M2: The time
when the monitoring ends (minute).
If Cycle Time is anything other than 24, a hyphen (-) is output.
The monitoring modeMonitoring Mode
Continuous Mode: Continuous mode, Period Mode: Period mode
132 Audit log examples