HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Table 18 Addresses of Fibre Channel Port (continued)
Address*ValueAddress*ValueAddress*ValueAddress*Value
25 (112)11355 (80)8198 (48)49CD (16)17
23 (113)11454 (81)8297 (49)50CC (17)18
1F (114)11553 (82)8390 (50)51CB (18)19
1E (115)11652 (83)848F (51)52CA (19)20
1D (116)11751 (84)8588 (52)53C9 (20)21
1B (117)1184E (85)8684 (53)54C7 (21)22
18 (118)1194D (86)8782 (54)55C6 (22)23
17 (119)1204C (87)8881 (55)56C5 (23)24
10 (120)1214B (88)8980 (56)57C3 (24)25
0F (121)1224A (89)907C (57)58BC (25)26
08 (122)12349 (90)917A (58)59BA (26)27
04 (123)12447 (91)9279 (59)60B9 (27)28
02 (124)12546 (92)9376 (60)61B6 (28)29
01 (125)12645 (93)9475 (61)62B5 (29)30
--43 (94)9574 (62)63B4 (30)31
--3C (95)9673 (63)64B3 (31)32
*Addresses outside parentheses indicate arbitrated-loop physical address (AL-PA). Addresses in parentheses indicate
loop IDs.
[PROV] Edit Ports(Attr)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Attr),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Attribute=RCU Target
++Port=[1E],Num. of Ports=1
Detailed Information
DescriptionItem
The attribute of the port after change.Attribute
Target: Target port, Initiator: Initiator port, RCU Target: RCU Target port, External: External
port
The name of the port where the setting is changed.Port
The number of ports where the setting is changed.Num. of Ports
[PROV] Edit Ports(Security)
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Security),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Provisioning Descriptions 145