HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information
DescriptionItem
The name of the port where authentication parameter has been setPort
The time to execute authentication after the failure of port authentication. The unit is second.Auth_TOV
The period of time to reject authentication when port authentication have failed. The unit is
minute.
Reject Time
The number of authentication failures allowed before port authentication is rejectedReject Count
The number of ports where authentication parameter has been setNum. of Ports
[PROV] Set FCSP Port Switch
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Port Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch,DH Group,Auth,UserName}
=[{1E,Enable,0,bi-directional,1111111111111111},
{3E,Disable,0,unidirectional,2222222222222222}],
Num. of Ports=2
Detailed Information
DescriptionItem
The name of the port where authentication parameter has been setPort
The setting status whether to execute authentication by port.Switch
Disable: Do not authenticate, Enable: Authenticate
Not used (fixed to 0)DH Group
The setting status of authentication method:Auth
bi-directional: bi-directional authentication, unidirectional: unidirectional authentication
The user name of the portUserName
The number of ports where authentication parameter has been setNum. of Ports
[PROV] Set FCSP Target
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set FCSP Target,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Switch,DH Group,UserName}
=[{1E,0xXXX,Enable,0,1111111111111111},
{3E,0xXXX,Disable,0,2222222222222222}],
Num. of Grps=2
Provisioning Descriptions 159