HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Detailed Information
DescriptionItem
The name of the port that includes the host group where authentication parameter has been
set
Port
The number of the host group where authentication has been setHostGrpID
The setting status whether to execute authentication by host group.Switch
Disable: Do not authenticate, Enable: Authenticate
Not used (fixed to 0)DH Group
The user name of the host groupUserName
The number of host groups where authentication parameter has been setNum. of Grps
[PROV] Set PageTieringLevel
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set PageTieringLevel,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,Result}=[{0x00:0x00:0x00,Normal end}]
++{Start Page,Page Length,Page Tiering Level,Page Range Result}
=[{10,5, Level1,Normal end},{100,10, Level1,Normal end}],
Num. of Page Ranges=2
+Num. of VOLs=1
Detailed Information
DescriptionItem
The LDKC, CU, and LDEV numbers of the volume where the tiering policy is setLDKC:CU:LDEV
The result of setting the tiering policy to the volumeResult
Normal end: Normal end
Warning(xxxx-yyyyy): End with warning
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The beginning page number of page rangesStart Page
The length of page rangesPage Length
The level of the tiering policy that is set to the page rangesPage Tiering Level
If you unset the tiering policy, a hyphen (-) is output.
The result of setting the tiering policy in page rangesPage Range Result
Normal end: Normal end
Warning(xxxx-yyyyy): End with warning
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The specified number of page rangesNum. of Page Ranges
The number of volumes where the tiering policy is setNum. of VOLs
160 Audit log examples