HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Table Of Contents
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,
MIH Time(s),Round Trip Time(ms),FREEZE,Result}
={99998,0x00,0x00,Default,6,08,015,001,Disable,Nomal end}
++{MCU Port,RCU Port}
=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},
{5H,7H}],Num. of Port Pairs=8
(Snip)
+{S/N,MCU LDKC,MCU,RCU LDKC,RCU,SSID,Controller ID,Min.Path,
MIH Time(s),Round Trip Time(ms),FREEZE,Result}
={99999,0x00,0x3F,0x00,0x7F,0x0004,6,08,015,001,Disable,Nomal end}
++{MCU Port,RCU Port}
=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},
{5H,7H}],Num. of Port Pairs=8
+Num. of RCUs=xx
Detailed Information
DescriptionItem
The serial number of the registered RCUS/N
The LDKC number of the connected LDKCMCU LDKC
The LDKC number of the paired LDKCRCU LDKC
The path group ID of the registered RCU. When the path group ID is default setting, "Default"
is output.
Path Gr.ID
The controller ID of the registered RCUController ID
7: XP7, 6: P9500, 5: XP24000/XP20000 Disk Array, 19: HUS VM
The CU number of the connected CUMCU
The CU number of the paired CURCU
The SSID of the registered RCUSSID
The port number of MCUMCU Port
The port number of the registered RCURCU Port
The number of set minimum pathsMin.Path
The value of set RIO MIH (Remote I/O Missing Interrupt Handler) timer (wait time until data
copy from MCU to RCU is complete). The unit is second.
MIH Time(s)
The round-trip response time set (delay time for round-trip remote I/O). The unit is millisecond.
This value is output when Continuous Access Synchronous or Continuous Access Synchronous
Z is used.
Round Trip Time(ms)
Indicates whether CGROUP (FREEZE/RUN) PPRC TSO command support is enabled or
disabled. This value is output only when Continuous Access Synchronous Z is used.
FREEZE
Enable or Disable is output.
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of port pairs setNum. of Port Pairs
The number of RCUs setNum. of RCUs
168 Audit log examples