HP XP7 Audit Log User and Reference Guide (H6F56-96001)

+Copy Type=Cnt Ac-J
+{LDKC,JNL,MirrorID,Copy Pace,Path Watch Time,
Forward Path Watch Time,Transfer Speed(Mbps),
Delta resync Failure,Result}
=[{0x00,0x001,0x00,Medium,12(hour),Yes,100,Entire,Normal end},
{0x00,0x002,0x00,Low,1(day),No,10,None,Normal end}],
Num. of Mirrors=2
Detailed Information
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-J: Continuous Access Journal, Cnt Ac-J Z: Continuous Access Journal Z
The LDKC number to which the journal belongsLDKC
The journal numberJNL
The mirror IDMirrorID
The speed of initial copyCopy Pace
Low: Low speed, Medium: Medium speed, High: High speed
The path blockade watch period setting. The units are minutes, hours or days. If it is set to
30 minutes, it will be 30(min.).
Path Watch Times
Indicates whether to transfer the path blockade watch period of the master journal to the
restore journal.
Forward Path Watch
Time
Yes: Transfer, No: Do Not Transfer
The transfer speed of the communication line. The unit is megabits per second (Mbps).Transfer Speed(Mbps)
Indicates the operation mode when Delta resync operation have failed.Delta resync Failure
Entire: Copy the entire data volume, None: Do not copy the entire data volume
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
where xxxx: Part code, yyyyy: Error code
The number of mirrorsNum. of Mirrors
[Remote Replication] Change RCU Option
Example 1: when using CU Free
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Change RCU Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,
MIH Time(s),Round Trip Time(ms),FREEZE,Result}
={99998,0x00,0x00,Default,6,08,015,001,Disable,Nomal end}
(Snip)
+{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,
MIH Time(s),Round Trip Time(ms),FREEZE,Result}
={99999,0x00,0x00,Default,6,08,015,001,Disable,Nomal end}
+Num. of RCUs=xx
Example 2: when not using CU Free
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Change RCU Option,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
170 Audit log examples