HP XP7 Audit Log User and Reference Guide (H6F56-96001)

Table Of Contents
[Remote Replication] Clear SIM
Example
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Clear SIM,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Remote Replication] Create Pairs
Example 1: when the copy type is Cnt Ac-S
08xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Remote Replication],Create Pairs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Copy Type=Cnt Ac-S,{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
S/N,LDKC,ID,Controller ID,Type,Initial Copy,Fence Level,
Copy Pace,Priority,Diff,Result}
=[{1A-0x00-0,GR-0xFE-1023,99999,0x00,Default,6,Sync,Entire,
Never,15,032,Auto,Normal end},(Snip)-(Snip)],Num. of Pairs=xx
Detailed Information 1
DescriptionItem
The program product name for this operationCopy Type
Cnt Ac-S: Continuous Access Synchronous
The port number, host group number, and LUN of the volume specified to the primary volumeP-VOL(Port-G-ID-LUN)
The port number, host group number, and LUN of the volume specified to the secondary
volume
S-VOL(Port-G-ID-LUN)
The serial number of the RCUS/N
The LDKC number of the RCULDKC
The path group ID or SSIDID
When the path group ID is default setting, "Default" is output.
The controller ID of the RCUController ID
7: XP7, 6: P9500, 5: XP24000/XP20000 Disk Array, 19: HUS VM
The update copy mode settingType
Sync: Synchronous mode
The initial copy mode settingInitial Copy
Entire: Copy all, None: None (Do not copy)
The fence level setting (the condition that MCU rejects the write operation to the primary
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed setting (the number of tracks you can copy at one time)Copy Pace
The priority of the set initial copy operation (scheduling order).Priority
The unit of the difference management settingDiff
Auto, Cylinder, Track
The result of the operationResult
Normal end: Normal end,
Error(xxxx-yyyyy): Abnormal end
172 Audit log examples